P2265: The fuel and water separator sensor works out of range or abnormally
The fuel and water separator sensor works out of range or abnormally. Check the sensor, connector and wiring.
| Code | P2265 |
|---|---|
| System | Engine and transmission |
| Group | P22xx, NOx sensors, oxygen sensors and emissions |
| Type | Generic: it means the same on every make |
How to read and clear P2265 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P2265 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P2261 The turbocharger or supercharger bypass valve has a fault
- P2262 No turbo boost pressure is detected
- P2263 Turbocharger or supercharger boost system performance
- P2264 Water in fuel sensor circuit fault
- P2269 Water in fuel detected
- P226B The boost pressure of the turbocharger or supercharger is too high
- P226C The turbocharger boost control A responds slowly
- P226F The turbocharger boost control B responds slowly
- P2200 NOx sensor circuit fault (bank 1)
- P2201 NOx sensor circuit range or performance problem (bank 1)
- P2227 Barometric pressure sensor A range or performance problem
- P2228 Barometric pressure sensor A circuit low
What does code P2265 mean?
The fuel and water separator sensor works out of range or abnormally. Check the sensor, connector and wiring.
How do you clear P2265?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P2265 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
