P249A: The EGR cooler bypass position sensor (bank 2) gives a higher signal than normal
The EGR cooler bypass position sensor (bank 2) gives a higher signal than normal. It is usually the sensor itself, its wiring or a real fault in what it measures.
| Code | P249A |
|---|---|
| System | Engine and transmission |
| Group | P24xx, EGR, EVAP and particulate filter |
| Type | Generic: it means the same on every make |
How to read and clear P249A with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P249A with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P2496 The EGR cooler bypass position sensor (bank 1) fails now and then
- P2497 The EGR cooler bypass position sensor (bank 2) has an electrical fault
- P2498 The EGR cooler bypass position sensor (bank 2) gives readings outside the
- P2499 The EGR cooler bypass position sensor (bank 2) gives a lower signal than normal
- P249B The EGR cooler bypass position sensor (bank 2) fails now and then
- P249C AdBlue injection control takes too long to enter closed loop operation
- P249D The closed loop AdBlue injection control in the limit flow gives a lower signal
- P249E The closed loop AdBlue injection control in the limit flow gives a higher
- P2400 EVAP leak detection pump control circuit open or faulty
- P2413 Exhaust gas recirculation (EGR) system performance
- P2414 O2 sensor exhaust sample error (bank 1, sensor 1)
- P2425 EGR cooler valve control circuit open or faulty
What does code P249A mean?
The EGR cooler bypass position sensor (bank 2) gives a higher signal than normal. It is usually the sensor itself, its wiring or a real fault in what it measures.
How do you clear P249A?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P249A comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
