P22EF: The cylinder 6 alternative fuel injector control gives a higher signal than
The cylinder 6 alternative fuel injector control gives a higher signal than normal. It is usually the part, its wiring or a connector with poor contact.
| Code | P22EF |
|---|---|
| System | Engine and transmission |
| Group | P22xx, NOx sensors, oxygen sensors and emissions |
| Type | Generic: it means the same on every make |
How to read and clear P22EF with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P22EF with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P22EB The cylinder 5 alternative fuel injector control gives a higher signal than
- P22EC The cylinder 5 alternative fuel injector control gives readings outside the
- P22ED The cylinder 6 alternative fuel injector control has a broken or disconnected
- P22EE The cylinder 6 alternative fuel injector control gives a lower signal than
- P22F0 The cylinder 6 alternative fuel injector control gives readings outside the
- P22F1 The cylinder 7 alternative fuel injector control has a broken or disconnected
- P22F2 The cylinder 7 alternative fuel injector control gives a lower signal than
- P22F3 The cylinder 7 alternative fuel injector control gives a higher signal than
- P2200 NOx sensor circuit fault (bank 1)
- P2201 NOx sensor circuit range or performance problem (bank 1)
- P2227 Barometric pressure sensor A range or performance problem
- P2228 Barometric pressure sensor A circuit low
What does code P22EF mean?
The cylinder 6 alternative fuel injector control gives a higher signal than normal. It is usually the part, its wiring or a connector with poor contact.
How do you clear P22EF?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P22EF comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
