P22CF: The turbocharger turbine intake valve control has a broken or disconnected wire
The turbocharger turbine intake valve control has a broken or disconnected wire. It is usually a broken wire, a loose connector or the part itself.
| Code | P22CF |
|---|---|
| System | Engine and transmission |
| Group | P22xx, NOx sensors, oxygen sensors and emissions |
| Type | Generic: it means the same on every make |
How to read and clear P22CF with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P22CF with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P22CB The turbocharger compressor output switching valve control gives a lower signal
- P22CC The turbocharger compressor output switching valve control gives a higher
- P22CD The turbocharger compressor output switching valve has got stuck
- P22CE The turbocharger compressor output switching valve has got stuck
- P22D0 The turbocharger turbine intake valve control gives a lower signal than normal
- P22D1 The turbocharger turbine intake valve control gives a higher signal than normal
- P22D2 The turbocharger turbine intake valve has got stuck
- P22D3 The turbocharger turbine intake valve has got stuck
- P2200 NOx sensor circuit fault (bank 1)
- P2201 NOx sensor circuit range or performance problem (bank 1)
- P2227 Barometric pressure sensor A range or performance problem
- P2228 Barometric pressure sensor A circuit low
What does code P22CF mean?
The turbocharger turbine intake valve control has a broken or disconnected wire. It is usually a broken wire, a loose connector or the part itself.
How do you clear P22CF?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P22CF comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
