P0EE3: The air conditioning refrigerant distribution valve B control has a broken or
The air conditioning refrigerant distribution valve B control has a broken or disconnected wire. It is usually a broken wire, a loose connector or the part itself.
| Code | P0EE3 |
|---|---|
| System | Engine and transmission |
| Group | P0Exx, Hybrid and electric |
| Type | Generic: it means the same on every make |
How to read and clear P0EE3 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0EE3 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0ED9 The generator phase Y current is above normal
- P0EDA There is a fault in the generator phase Z current
- P0EDB The generator phase Z current is below normal
- P0EDC The generator phase Z current is above normal
- P0EE4 The air conditioning refrigerant distribution valve B control gives a lower
- P0EE5 The air conditioning refrigerant distribution valve B control gives a higher
- P0EE7 The charge connector temperature sensor B has an electrical fault
- P0EE8 The charge connector temperature sensor B gives readings outside the normal
What does code P0EE3 mean?
The air conditioning refrigerant distribution valve B control has a broken or disconnected wire. It is usually a broken wire, a loose connector or the part itself.
How do you clear P0EE3?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0EE3 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
