P0AE6: The hybrid battery precharge contactor control gives a lower signal than normal
The hybrid battery precharge contactor control gives a lower signal than normal. It is usually the part, its wiring or a connector with poor contact.
| Code | P0AE6 |
|---|---|
| System | Engine and transmission |
| Group | P0Axx, Hybrid and electric |
| Type | Generic: it means the same on every make |
How to read and clear P0AE6 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0AE6 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0AE2 The hybrid battery precharge contactor circuit has got stuck
- P0AE3 The hybrid battery precharge contactor circuit has got stuck
- P0AE4 The hybrid battery precharge contactor control has an electrical fault
- P0AE5 The hybrid battery precharge contactor control gives readings outside the
- P0AE7 The hybrid battery precharge contactor control gives a higher signal than normal
- P0AE8 The hybrid battery temperature sensor D has an electrical fault
- P0AE9 The hybrid battery temperature sensor D gives readings outside the normal range
- P0AEA The hybrid battery temperature sensor D gives a lower signal than normal
- P0A0F Engine failed to start
- P0A1F Battery energy control module fault
- P0A7F Hybrid battery pack deterioration
- P0A80 Replace hybrid battery pack
What does code P0AE6 mean?
The hybrid battery precharge contactor control gives a lower signal than normal. It is usually the part, its wiring or a connector with poor contact.
How do you clear P0AE6?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0AE6 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
