P0ABF: The high voltage battery current sensor A has an electrical fault
The high voltage battery current sensor A has an electrical fault. It may be the part itself, its connector or the wiring.
| Code | P0ABF |
|---|---|
| System | Engine and transmission |
| Group | P0Axx, Hybrid and electric |
| Type | Generic: it means the same on every make |
How to read and clear P0ABF with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0ABF with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0ABB The high voltage battery voltage detection A gives readings outside the normal
- P0ABC The high voltage battery voltage detection A gives a lower signal than normal
- P0ABD The high voltage battery voltage detection A gives a higher signal than normal
- P0ABE The high voltage battery voltage detection A fails now and then
- P0AC0 The high voltage battery current sensor A gives readings outside the normal
- P0AC1 The high voltage battery current sensor A gives a lower signal than normal
- P0AC2 The high voltage battery current sensor A gives a higher signal than normal
- P0AC3 The high voltage battery current sensor A fails now and then
- P0A0F Engine failed to start
- P0A1F Battery energy control module fault
- P0A7F Hybrid battery pack deterioration
- P0A80 Replace hybrid battery pack
What does code P0ABF mean?
The high voltage battery current sensor A has an electrical fault. It may be the part itself, its connector or the wiring.
How do you clear P0ABF?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0ABF comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
