P0A36: The generator temperature sensor has an electrical fault
The generator temperature sensor has an electrical fault. It may be the part itself, its connector or the wiring.
| Code | P0A36 |
|---|---|
| System | Engine and transmission |
| Group | P0Axx, Hybrid and electric |
| Type | Generic: it means the same on every make |
How to read and clear P0A36 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0A36 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0A32 The traction motor temperature sensor B gives a lower signal than normal
- P0A33 The traction motor temperature sensor B gives a higher signal than normal
- P0A34 The traction motor temperature sensor B fails now and then
- P0A35 The traction motor B is getting too hot
- P0A37 The generator temperature sensor gives readings outside the normal range
- P0A38 The generator temperature sensor gives a lower signal than normal
- P0A39 The generator temperature sensor gives a higher signal than normal
- P0A3A The generator temperature sensor fails now and then
- P0A0F Engine failed to start
- P0A1F Battery energy control module fault
- P0A7F Hybrid battery pack deterioration
- P0A80 Replace hybrid battery pack
What does code P0A36 mean?
The generator temperature sensor has an electrical fault. It may be the part itself, its connector or the wiring.
How do you clear P0A36?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0A36 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
