P0A09: The DC converter state gives a lower signal than normal
The DC converter state gives a lower signal than normal. It is usually the part, its wiring or a connector with poor contact.
| Code | P0A09 |
|---|---|
| System | Engine and transmission |
| Group | P0Axx, Hybrid and electric |
| Type | Generic: it means the same on every make |
How to read and clear P0A09 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0A09 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0A05 The engine electronics coolant pump A control has a broken or disconnected wire
- P0A06 The engine electronics coolant pump A control gives a lower signal than normal
- P0A07 The engine electronics coolant pump A control gives a higher signal than normal
- P0A08 The DC converter state has an electrical fault
- P0A0A The high voltage system interlock has an electrical fault
- P0A0B The high voltage system interlock gives readings outside the normal range
- P0A0C The high voltage system interlock gives a lower signal than normal
- P0A0D The high voltage system interlock gives a higher signal than normal
- P0A0F Engine failed to start
- P0A1F Battery energy control module fault
- P0A7F Hybrid battery pack deterioration
- P0A80 Replace hybrid battery pack
What does code P0A09 mean?
The DC converter state gives a lower signal than normal. It is usually the part, its wiring or a connector with poor contact.
How do you clear P0A09?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0A09 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
