P0830: The clutch pedal switch A has an electrical fault
The clutch pedal switch A has an electrical fault. It may be the part itself, its connector or the wiring.
| Code | P0830 |
|---|---|
| System | Engine and transmission |
| Group | P08xx, Transmission |
| Type | Generic: it means the same on every make |
How to read and clear P0830 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0830 with its description and whether it’s confirmed, pending or permanent.
This code is usually stored by the gearbox control unit. If the car reports it over standard OBD, you read it for nothing with FREE; to read it straight from the gearbox control unit, with its description and clearing, you need PRO.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P082C The gear lever X position gives a higher signal than normal
- P082D The gear lever Y position gives readings outside the normal range
- P082E The gear lever Y position gives a lower signal than normal
- P082F The gear lever Y position gives a higher signal than normal
- P0831 The clutch pedal switch A gives a lower signal than normal
- P0832 The clutch pedal switch A gives a higher signal than normal
- P0833 The clutch pedal switch B has an electrical fault
- P0834 The clutch pedal switch B gives a lower signal than normal
- P0841 Transmission fluid pressure sensor/switch A: circuit range or performance
- P0842 Transmission fluid pressure sensor/switch A: circuit low
- P0843 Transmission fluid pressure sensor/switch A: circuit high
- P0868 Transmission fluid pressure low
To understand it properly
We explain how that system works, with drawings and no waffle, in our mechanics guide: Clutch and dual-mass flywheel.
What does code P0830 mean?
The clutch pedal switch A has an electrical fault. It may be the part itself, its connector or the wiring.
How do you clear P0830?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0830 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
