P0724: The brake switch B circuit has a high signal
The brake switch B circuit has a high signal. Check the switch, its connector and wiring.
| Code | P0724 |
|---|---|
| System | Engine and transmission |
| Group | P07xx, Transmission |
| Type | Generic: it means the same on every make |
How to read and clear P0724 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0724 with its description and whether it’s confirmed, pending or permanent.
This code is usually stored by the gearbox control unit. If the car reports it over standard OBD, you read it for nothing with FREE; to read it straight from the gearbox control unit, with its description and clearing, you need PRO.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0720 Output speed sensor: circuit fault
- P0721 Output speed sensor: range/performance
- P0722 Output speed sensor: no signal
- P0723 The output speed sensor fails now and then
- P0725 Engine speed input to gearbox: circuit fault
- P0726 The engine speed input gives readings outside the normal range
- P0727 The engine speed input has no signal
- P0728 The engine speed input fails now and then
- P0700 Transmission control system: fault detected
- P0701 Transmission control system: range/performance
- P0702 Transmission control system: electrical fault
- P0703 Torque converter/brake switch B: circuit fault
What does code P0724 mean?
The brake switch B circuit has a high signal. Check the switch, its connector and wiring.
How do you clear P0724?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0724 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
