P05BE: The Stop Start button gives a lower signal than normal
The Stop Start button gives a lower signal than normal. It is usually the part, its wiring or a connector with poor contact.
| Code | P05BE |
|---|---|
| System | Engine and transmission |
| Group | P05xx, Speed, idle and auxiliary inputs |
| Type | Generic: it means the same on every make |
How to read and clear P05BE with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P05BE with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P05B9 The airbag crash notification line gives a lower signal than normal
- P05BA The airbag crash notification line gives a higher signal than normal
- P05BC The Stop Start button has a broken or disconnected wire
- P05BD The Stop Start button gives an abnormal signal
- P05BF The Stop Start button gives a higher signal than normal
- P05C0 The active grille air shutter module A is getting too hot
- P05C1 The active grille air shutter module B is getting too hot
- P05C2 The engine coolant pressure sensor has an electrical fault
- P0500 Vehicle speed sensor malfunction
- P0501 Vehicle speed sensor range/performance
- P0502 Vehicle speed sensor circuit low input
- P0503 Vehicle speed sensor intermittent, erratic or high
What does code P05BE mean?
The Stop Start button gives a lower signal than normal. It is usually the part, its wiring or a connector with poor contact.
How do you clear P05BE?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P05BE comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
