P0525: The cruise control servo control gives readings outside the normal range
The cruise control servo control gives readings outside the normal range. It is usually the part, its wiring or a connector with poor contact.
| Code | P0525 |
|---|---|
| System | Engine and transmission |
| Group | P05xx, Speed, idle and auxiliary inputs |
| Type | Generic: it means the same on every make |
How to read and clear P0525 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0525 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0521 Oil pressure sensor/switch range/performance
- P0522 Oil pressure sensor/switch low voltage
- P0523 Oil pressure sensor/switch high voltage
- P0524 Engine oil pressure too low
- P0526 The fan speed sensor has an electrical fault
- P0527 The fan speed sensor gives readings outside the normal range
- P0528 No signal arrives from the coolant fan speed sensor
- P0529 The fan speed sensor fails now and then
- P0500 Vehicle speed sensor malfunction
- P0501 Vehicle speed sensor range/performance
- P0502 Vehicle speed sensor circuit low input
- P0503 Vehicle speed sensor intermittent, erratic or high
What does code P0525 mean?
The cruise control servo control gives readings outside the normal range. It is usually the part, its wiring or a connector with poor contact.
How do you clear P0525?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0525 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
