C0616: The parking brake control unit control gives readings outside the normal range
The parking brake control unit control gives readings outside the normal range. It is usually the part, its wiring or a connector with poor contact.
| Code | C0616 |
|---|---|
| System | Chassis |
| Group | C06xx, Chassis |
| Type | Generic: it means the same on every make |
How to read and clear C0616 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see C0616 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- C0612 The right parking brake actuator control gives a higher signal than normal
- C0613 The right parking brake actuator has got stuck
- C0614 The right parking brake actuator has got stuck
- C0615 The parking brake control unit control has a broken or disconnected wire
- C0617 The parking brake control unit control gives a lower signal than normal
- C0618 The parking brake control unit control gives a higher signal than normal
- C0619 The brake pedal position sensor A offset needs its learning procedure
- C061A The brake pedal position sensor B offset needs its learning procedure
What does code C0616 mean?
The parking brake control unit control gives readings outside the normal range. It is usually the part, its wiring or a connector with poor contact.
How do you clear C0616?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, C0616 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
