C061A: The brake pedal position sensor B offset needs its learning procedure
The brake pedal position sensor B offset needs its learning procedure. It is solved at the workshop with a diagnostic tool.
| Code | C061A |
|---|---|
| System | Chassis |
| Group | C06xx, Chassis |
| Type | Generic: it means the same on every make |
How to read and clear C061A with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see C061A with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- C0616 The parking brake control unit control gives readings outside the normal range
- C0617 The parking brake control unit control gives a lower signal than normal
- C0618 The parking brake control unit control gives a higher signal than normal
- C0619 The brake pedal position sensor A offset needs its learning procedure
What does code C061A mean?
The brake pedal position sensor B offset needs its learning procedure. It is solved at the workshop with a diagnostic tool.
How do you clear C061A?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, C061A comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
