P2C62: The lambda sensor pumping current trim (bank 1
The lambda sensor pumping current trim (bank 1, sensor 3) has a broken or disconnected wire. It is usually a broken wire, a loose connector or the part itself.
| Code | P2C62 |
|---|---|
| System | Engine and transmission |
| Group | P2Cxx, Engine, emissions and electrification |
| Type | Generic: it means the same on every make |
How to read and clear P2C62 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P2C62 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P2C5E The cylinder 7 fuel injector B offset learning has reached its lower limit
- P2C5F The cylinder 7 fuel injector B offset learning has reached its upper limit
- P2C60 The cylinder 8 fuel injector B offset learning has reached its lower limit
- P2C61 The cylinder 8 fuel injector B offset learning has reached its upper limit
- P2C63 The lambda sensor pumping current trim (bank 1
- P2C64 The lambda sensor pumping current trim (bank 1
- P2C66 The high voltage electronics coolant pump is turning slower than it should
- P2C67 The high voltage electronics coolant pump is turning faster than it should
What does code P2C62 mean?
The lambda sensor pumping current trim (bank 1, sensor 3) has a broken or disconnected wire. It is usually a broken wire, a loose connector or the part itself.
How do you clear P2C62?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P2C62 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
