P2762: The torque converter clutch pressure control solenoid control gives readings
The torque converter clutch pressure control solenoid control gives readings outside the normal range. It is usually the part, its wiring or a connector with poor contact.
| Code | P2762 |
|---|---|
| System | Engine and transmission |
| Group | P27xx, Transmission |
| Type | Generic: it means the same on every make |
How to read and clear P2762 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P2762 with its description and whether it’s confirmed, pending or permanent.
This code is usually stored by the gearbox control unit. If the car reports it over standard OBD, you read it for nothing with FREE; to read it straight from the gearbox control unit, with its description and clearing, you need PRO.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P275E The gearbox D oil temperature sensor fails now and then
- P275F The gearbox oil has reached too high a temperature
- P2760 The torque converter clutch pressure control solenoid control fails now and then
- P2761 The torque converter clutch pressure control solenoid control has a broken or
- P2763 The torque converter clutch pressure control solenoid control gives a higher
- P2764 The torque converter clutch pressure control solenoid control gives a lower
- P2765 The circuit of speed sensor B for the gearbox input shaft or turbine has a fault
- P2766 Gearbox input shaft speed sensor B operates outside its expected range
What does code P2762 mean?
The torque converter clutch pressure control solenoid control gives readings outside the normal range. It is usually the part, its wiring or a connector with poor contact.
How do you clear P2762?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P2762 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
