P2757: The torque converter clutch pressure control solenoid control circuit has got
The torque converter clutch pressure control solenoid control circuit has got stuck. It is usually dirt, wear or the motor that moves it.
| Code | P2757 |
|---|---|
| System | Engine and transmission |
| Group | P27xx, Transmission |
| Type | Generic: it means the same on every make |
How to read and clear P2757 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P2757 with its description and whether it’s confirmed, pending or permanent.
This code is usually stored by the gearbox control unit. If the car reports it over standard OBD, you read it for nothing with FREE; to read it straight from the gearbox control unit, with its description and clearing, you need PRO.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P2753 The gearbox oil cooler control has a broken or disconnected wire
- P2754 The gearbox oil cooler control gives a lower signal than normal
- P2755 The gearbox oil cooler control gives a higher signal than normal
- P2756 The torque converter clutch pressure control solenoid is not working properly
- P2758 The torque converter clutch pressure control solenoid control circuit has got
- P2759 The solenoid controlling torque converter clutch pressure has an electrical
- P275A The gearbox D oil temperature sensor has an electrical fault
- P275B The gearbox D oil temperature sensor gives readings outside the normal range
What does code P2757 mean?
The torque converter clutch pressure control solenoid control circuit has got stuck. It is usually dirt, wear or the motor that moves it.
How do you clear P2757?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P2757 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
