P2705: The time taken for gearbox friction element F to engage is outside the expected
The time taken for gearbox friction element F to engage is outside the expected range.
| Code | P2705 |
|---|---|
| System | Engine and transmission |
| Group | P27xx, Transmission |
| Type | Generic: it means the same on every make |
How to read and clear P2705 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P2705 with its description and whether it’s confirmed, pending or permanent.
This code is usually stored by the gearbox control unit. If the car reports it over standard OBD, you read it for nothing with FREE; to read it straight from the gearbox control unit, with its description and clearing, you need PRO.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P2701 The gearbox friction element B engagement time is outside its expected range
- P2702 The gearbox friction element C engagement time is outside its expected range
- P2703 The gearbox friction element D engagement time is outside its expected range
- P2704 The gearbox friction element E engagement time is outside its expected range
- P2706 The gearbox solenoid F is not working properly
- P2707 The gearbox solenoid F has got stuck
- P2708 The gearbox solenoid F has got stuck
- P2709 Gearbox shift solenoid F has an electrical fault
What does code P2705 mean?
The time taken for gearbox friction element F to engage is outside the expected range.
How do you clear P2705?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P2705 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
