P2702: The gearbox friction element C engagement time is outside its expected range
The gearbox friction element C engagement time is outside its expected range.
| Code | P2702 |
|---|---|
| System | Engine and transmission |
| Group | P27xx, Transmission |
| Type | Generic: it means the same on every make |
How to read and clear P2702 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P2702 with its description and whether it’s confirmed, pending or permanent.
This code is usually stored by the gearbox control unit. If the car reports it over standard OBD, you read it for nothing with FREE; to read it straight from the gearbox control unit, with its description and clearing, you need PRO.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P2700 The gearbox friction element A engagement time is outside its expected range
- P2701 The gearbox friction element B engagement time is outside its expected range
- P2703 The gearbox friction element D engagement time is outside its expected range
- P2704 The gearbox friction element E engagement time is outside its expected range
- P2705 The time taken for gearbox friction element F to engage is outside the expected
- P2706 The gearbox solenoid F is not working properly
What does code P2702 mean?
The gearbox friction element C engagement time is outside its expected range.
How do you clear P2702?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P2702 comes back.
