P2695: Injector 10 data is incompatible with what the control unit expects
Injector 10 data is incompatible with what the control unit expects. It may come from another faulty unit or outdated software.
| Code | P2695 |
|---|---|
| System | Engine and transmission |
| Group | P26xx, Auxiliary outputs and cooling |
| Type | Generic: it means the same on every make |
How to read and clear P2695 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P2695 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P2691 Injector 6 has incompatible data
- P2692 Injector 7 has incompatible data
- P2693 Injector 8 has incompatible data
- P2694 Injector 9 has incompatible data
- P2696 The injector data is incompatible with this control unit
- P2697 The exhaust after-treatment fuel injector A has a broken or disconnected wire
- P2698 The exhaust after-treatment fuel injector A gives readings outside the normal
- P2699 The exhaust after-treatment fuel injector A gives a lower signal than normal
What does code P2695 mean?
Injector 10 data is incompatible with what the control unit expects. It may come from another faulty unit or outdated software.
How do you clear P2695?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P2695 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
