P2694: Injector 9 has incompatible data
Injector 9 has incompatible data. Another control unit fault or outdated software may be responsible.
| Code | P2694 |
|---|---|
| System | Engine and transmission |
| Group | P26xx, Auxiliary outputs and cooling |
| Type | Generic: it means the same on every make |
How to read and clear P2694 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P2694 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P2690 Injector 5 has incompatible data
- P2691 Injector 6 has incompatible data
- P2692 Injector 7 has incompatible data
- P2693 Injector 8 has incompatible data
- P2695 Injector 10 data is incompatible with what the control unit expects
- P2696 The injector data is incompatible with this control unit
- P2697 The exhaust after-treatment fuel injector A has a broken or disconnected wire
- P2698 The exhaust after-treatment fuel injector A gives readings outside the normal
What does code P2694 mean?
Injector 9 has incompatible data. Another control unit fault or outdated software may be responsible.
How do you clear P2694?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P2694 comes back.
