P267F: The control unit internal temperature sensor A fails now and then
The control unit internal temperature sensor A fails now and then. It is usually the part, its wiring or a connector with poor contact.
| Code | P267F |
|---|---|
| System | Engine and transmission |
| Group | P26xx, Auxiliary outputs and cooling |
| Type | Generic: it means the same on every make |
How to read and clear P267F with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P267F with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P267B The position sensor circuit for rocker arm actuator B on bank 2 is outside its
- P267C The position sensor circuit for rocker arm actuator B on bank 2 has a low signal
- P267D The position sensor circuit for rocker arm actuator B on bank 2 has a high
- P267E The position sensor signal for rocker arm actuator B on bank 2 is intermittent
- P2680 The coolant expansion tank valve control circuit reads high
- P2681 The engine coolant bypass valve control has a broken or disconnected wire
- P2682 The engine coolant bypass valve control gives a lower signal than normal
- P2683 The engine coolant bypass valve control gives a higher signal than normal
What does code P267F mean?
The control unit internal temperature sensor A fails now and then. It is usually the part, its wiring or a connector with poor contact.
How do you clear P267F?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P267F comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
