P267D: The position sensor circuit for rocker arm actuator B on bank 2 has a high
The position sensor circuit for rocker arm actuator B on bank 2 has a high signal. Check the sensor, connector and wiring.
| Code | P267D |
|---|---|
| System | Engine and transmission |
| Group | P26xx, Auxiliary outputs and cooling |
| Type | Generic: it means the same on every make |
How to read and clear P267D with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P267D with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P2679 The coolant expansion tank valve control circuit reads low
- P267A The rocker arm actuator position sensor circuit B (bank 2) is not working
- P267B The position sensor circuit for rocker arm actuator B on bank 2 is outside its
- P267C The position sensor circuit for rocker arm actuator B on bank 2 has a low signal
- P267E The position sensor signal for rocker arm actuator B on bank 2 is intermittent
- P267F The control unit internal temperature sensor A fails now and then
- P2680 The coolant expansion tank valve control circuit reads high
- P2681 The engine coolant bypass valve control has a broken or disconnected wire
What does code P267D mean?
The position sensor circuit for rocker arm actuator B on bank 2 has a high signal. Check the sensor, connector and wiring.
How do you clear P267D?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P267D comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
