P236C: The cylinder 12 pressure is above normal
The cylinder 12 pressure is above normal. It may be the part itself, its connector or the wiring.
| Code | P236C |
|---|---|
| System | Engine and transmission |
| Group | P23xx, Ignition coils and engine |
| Type | Generic: it means the same on every make |
How to read and clear P236C with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P236C with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P2368 The cylinder 12 pressure sensor gives a lower signal than normal
- P2369 The cylinder 12 pressure sensor gives a higher signal than normal
- P236A The cylinder 12 pressure sensor fails now and then
- P236B The cylinder 12 pressure is below normal
- P236D The cylinder 12 pressure variation gives a lower signal than normal
- P236E The cylinder 12 pressure variation gives a higher signal than normal
- P236F Combustion in cylinder 12 is not performing as expected
- P2370 The fuel volume regulator B control has a broken or disconnected wire
- P2300 Ignition coil A primary control circuit low
- P2301 Ignition coil A primary control circuit high
- P2303 Ignition coil B primary control circuit low
- P2304 Ignition coil B primary control circuit high
What does code P236C mean?
The cylinder 12 pressure is above normal. It may be the part itself, its connector or the wiring.
How do you clear P236C?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P236C comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
