P2134: Circuit F of the throttle or pedal position sensor or switch fails
Circuit F of the throttle or pedal position sensor or switch fails intermittently. Check the part, connector and wiring.
| Code | P2134 |
|---|---|
| System | Engine and transmission |
| Group | P21xx, Throttle, injection and emissions |
| Type | Generic: it means the same on every make |
How to read and clear P2134 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P2134 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P2130 The throttle or pedal position sensor F circuit has a fault
- P2131 Circuit F of the throttle or pedal position sensor or switch operates outside
- P2132 Signal F of the throttle or pedal position sensor or switch is too low
- P2133 Signal F of the throttle or pedal position sensor or switch is too high
- P2135 Throttle or pedal position sensors A and B voltage mismatch
- P2136 The throttle or pedal position sensor signals do not match each other
- P2137 Voltages B and C of the throttle or pedal position sensor or switch disagree
- P2138 Throttle or pedal position sensors D and E voltage mismatch
- P2100 Throttle actuator A control motor circuit open
- P2101 Throttle actuator A control motor circuit range or performance
- P2102 Throttle actuator A control motor circuit low
- P2104 Throttle control system: forced idle
What does code P2134 mean?
Circuit F of the throttle or pedal position sensor or switch fails intermittently. Check the part, connector and wiring.
How do you clear P2134?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P2134 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
