P206C: The AdBlue quality sensor gives a lower signal than normal
The AdBlue quality sensor gives a lower signal than normal. It is usually the sensor itself, its wiring or a real fault in what it measures.
| Code | P206C |
|---|---|
| System | Engine and transmission |
| Group | P20xx, Emissions: catalysts and AdBlue |
| Type | Generic: it means the same on every make |
How to read and clear P206C with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P206C with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P2068 The fuel level sensor B gives a higher signal than normal
- P2069 The fuel level sensor B fails now and then
- P206A The AdBlue quality sensor has an electrical fault
- P206B The AdBlue quality sensor gives readings outside the normal range
- P206D The AdBlue quality sensor gives a higher signal than normal
- P2070 The solenoid controlling intake manifold air is stuck open
- P2071 The solenoid controlling intake manifold air is stuck closed
- P2072 The throttle actuator is stuck in the system that controls it
- P2002 Diesel particulate filter efficiency below threshold (bank 1)
- P2003 Diesel particulate filter efficiency below threshold (bank 2)
- P2004 Intake manifold runner control stuck open (bank 1)
- P2005 Intake manifold runner control stuck open (bank 2)
What does code P206C mean?
The AdBlue quality sensor gives a lower signal than normal. It is usually the sensor itself, its wiring or a real fault in what it measures.
How do you clear P206C?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P206C comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
