P2022: The position sensor or switch circuit for the intake manifold air actuator on
The position sensor or switch circuit for the intake manifold air actuator on bank 2 has a high signal. Check the part, its connector and wiring.
| Code | P2022 |
|---|---|
| System | Engine and transmission |
| Group | P20xx, Emissions: catalysts and AdBlue |
| Type | Generic: it means the same on every make |
How to read and clear P2022 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P2022 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P201B The supply voltage for the intake manifold air control actuator on bank 1 is
- P201C The supply voltage for the intake manifold air control actuator on bank 2 is
- P2020 The position sensor or switch signal for the intake air actuator on bank 2 is
- P2021 The position sensor or switch circuit for the intake manifold air actuator on
- P2023 The position sensor or switch circuit for the intake manifold air actuator on
- P2024 There is a fault in the fuel vapour temperature sensor circuit
- P2025 The fuel vapour temperature sensor operates out of range
- P2026 The fuel vapour temperature sensor gives a low voltage
- P2002 Diesel particulate filter efficiency below threshold (bank 1)
- P2003 Diesel particulate filter efficiency below threshold (bank 2)
- P2004 Intake manifold runner control stuck open (bank 1)
- P2005 Intake manifold runner control stuck open (bank 2)
What does code P2022 mean?
The position sensor or switch circuit for the intake manifold air actuator on bank 2 has a high signal. Check the part, its connector and wiring.
How do you clear P2022?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P2022 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
