P0C91: The high voltage battery temperature sensor J fails now and then
The high voltage battery temperature sensor J fails now and then. It is usually the part, its wiring or a connector with poor contact.
| Code | P0C91 |
|---|---|
| System | Engine and transmission |
| Group | P0Cxx, Hybrid and electric |
| Type | Generic: it means the same on every make |
How to read and clear P0C91 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0C91 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0C8D The high voltage battery temperature sensor J has an electrical fault
- P0C8E The high voltage battery temperature sensor J gives readings outside the normal
- P0C8F The high voltage battery temperature sensor J gives a lower signal than normal
- P0C90 The high voltage battery temperature sensor J gives a higher signal than normal
- P0C92 The high voltage battery temperature sensor K has an electrical fault
- P0C93 The high voltage battery temperature sensor K gives readings outside the normal
- P0C94 The high voltage battery temperature sensor K gives a lower signal than normal
- P0C95 The high voltage battery temperature sensor K gives a higher signal than normal
What does code P0C91 mean?
The high voltage battery temperature sensor J fails now and then. It is usually the part, its wiring or a connector with poor contact.
How do you clear P0C91?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0C91 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
