P09A6: The gate selection position circuit C is not working properly
The gate selection position circuit C is not working properly. It may be the part itself, its connector or the wiring.
| Code | P09A6 |
|---|---|
| System | Engine and transmission |
| Group | P09xx, Transmission |
| Type | Generic: it means the same on every make |
How to read and clear P09A6 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P09A6 with its description and whether it’s confirmed, pending or permanent.
This code is usually stored by the gearbox control unit. If the car reports it over standard OBD, you read it for nothing with FREE; to read it straight from the gearbox control unit, with its description and clearing, you need PRO.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P09A2 The gate selection position circuit B is not working properly
- P09A3 The gate selection position circuit B gives readings outside the normal range
- P09A4 The gate selection position circuit B gives a lower signal than normal
- P09A5 The gate selection position circuit B gives a higher signal than normal
- P09A7 The gate selection position circuit C gives readings outside the normal range
- P09A8 The gate selection position circuit C gives a lower signal than normal
- P09A9 The gate selection position circuit C gives a higher signal than normal
What does code P09A6 mean?
The gate selection position circuit C is not working properly. It may be the part itself, its connector or the wiring.
How do you clear P09A6?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P09A6 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
