P09A2: The gate selection position circuit B is not working properly
The gate selection position circuit B is not working properly. It may be the part itself, its connector or the wiring.
| Code | P09A2 |
|---|---|
| System | Engine and transmission |
| Group | P09xx, Transmission |
| Type | Generic: it means the same on every make |
How to read and clear P09A2 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P09A2 with its description and whether it’s confirmed, pending or permanent.
This code is usually stored by the gearbox control unit. If the car reports it over standard OBD, you read it for nothing with FREE; to read it straight from the gearbox control unit, with its description and clearing, you need PRO.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P099E The gearbox solenoid H control gives a lower signal than normal
- P099F The gearbox solenoid H control gives a higher signal than normal
- P09A0 The gearbox solenoid G control has a broken or disconnected wire
- P09A1 The gearbox solenoid H control has a broken or disconnected wire
- P09A3 The gate selection position circuit B gives readings outside the normal range
- P09A4 The gate selection position circuit B gives a lower signal than normal
- P09A5 The gate selection position circuit B gives a higher signal than normal
- P09A6 The gate selection position circuit C is not working properly
What does code P09A2 mean?
The gate selection position circuit B is not working properly. It may be the part itself, its connector or the wiring.
How do you clear P09A2?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P09A2 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
