P095A: The gear shift position circuit C is not working properly
The gear shift position circuit C is not working properly. It may be the part itself, its connector or the wiring.
| Code | P095A |
|---|---|
| System | Engine and transmission |
| Group | P09xx, Transmission |
| Type | Generic: it means the same on every make |
How to read and clear P095A with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P095A with its description and whether it’s confirmed, pending or permanent.
This code is usually stored by the gearbox control unit. If the car reports it over standard OBD, you read it for nothing with FREE; to read it straight from the gearbox control unit, with its description and clearing, you need PRO.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0956 The ASM manual shift mode operates outside its expected range
- P0957 The ASM manual shift mode circuit has a low signal
- P0958 The ASM manual shift mode circuit has a high signal
- P0959 The ASM manual shift mode circuit has an intermittent fault
- P095B The gear shift position circuit C gives readings outside the normal range
- P095C The gear shift position circuit C gives a lower signal than normal
- P095D The gear shift position circuit C gives a higher signal than normal
- P0960 The pressure control solenoid A control circuit has a broken or disconnected
What does code P095A mean?
The gear shift position circuit C is not working properly. It may be the part itself, its connector or the wiring.
How do you clear P095A?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P095A comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
