P08CA: The pressure control solenoid M control gives a lower signal than normal
The pressure control solenoid M control gives a lower signal than normal. It is usually the part, its wiring or a connector with poor contact.
| Code | P08CA |
|---|---|
| System | Engine and transmission |
| Group | P08xx, Transmission |
| Type | Generic: it means the same on every make |
How to read and clear P08CA with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P08CA with its description and whether it’s confirmed, pending or permanent.
This code is usually stored by the gearbox control unit. If the car reports it over standard OBD, you read it for nothing with FREE; to read it straight from the gearbox control unit, with its description and clearing, you need PRO.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P08C5 The pressure control solenoid M has got stuck
- P08C7 The pressure control solenoid M fails now and then
- P08C8 The pressure control solenoid M control has a broken or disconnected wire
- P08C9 The pressure control solenoid M control gives readings outside the normal range
- P08CB The pressure control solenoid M control gives a higher signal than normal
- P08CC The gearbox solenoid J is not working properly
- P08CD The gearbox solenoid J has got stuck
- P08CE The gearbox solenoid J has got stuck
- P0841 Transmission fluid pressure sensor/switch A: circuit range or performance
- P0842 Transmission fluid pressure sensor/switch A: circuit low
- P0843 Transmission fluid pressure sensor/switch A: circuit high
- P0868 Transmission fluid pressure low
What does code P08CA mean?
The pressure control solenoid M control gives a lower signal than normal. It is usually the part, its wiring or a connector with poor contact.
How do you clear P08CA?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P08CA comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
