P0873: The gearbox oil pressure sensor C gives a higher signal than normal
The gearbox oil pressure sensor C gives a higher signal than normal. It is usually the sensor itself, its wiring or a real fault in what it measures.
| Code | P0873 |
|---|---|
| System | Engine and transmission |
| Group | P08xx, Transmission |
| Type | Generic: it means the same on every make |
How to read and clear P0873 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0873 with its description and whether it’s confirmed, pending or permanent.
This code is usually stored by the gearbox control unit. If the car reports it over standard OBD, you read it for nothing with FREE; to read it straight from the gearbox control unit, with its description and clearing, you need PRO.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P086F The neutral position sensor A needs its learning procedure
- P0870 The gearbox oil pressure sensor C has an electrical fault
- P0871 The gearbox oil pressure sensor C gives readings outside the normal range
- P0872 The gearbox oil pressure sensor C gives a lower signal than normal
- P0874 The gearbox oil pressure sensor C fails now and then
- P0875 The gearbox oil pressure sensor D has an electrical fault
- P0876 The gearbox oil pressure sensor D gives readings outside the normal range
- P0877 The gearbox oil pressure sensor D gives a lower signal than normal
- P0841 Transmission fluid pressure sensor/switch A: circuit range or performance
- P0842 Transmission fluid pressure sensor/switch A: circuit low
- P0843 Transmission fluid pressure sensor/switch A: circuit high
- P0868 Transmission fluid pressure low
What does code P0873 mean?
The gearbox oil pressure sensor C gives a higher signal than normal. It is usually the sensor itself, its wiring or a real fault in what it measures.
How do you clear P0873?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0873 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
