P074E: The gearbox cannot engage gear 6
The gearbox cannot engage gear 6.
| Code | P074E |
|---|---|
| System | Engine and transmission |
| Group | P07xx, Transmission |
| Type | Generic: it means the same on every make |
How to read and clear P074E with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P074E with its description and whether it’s confirmed, pending or permanent.
This code is usually stored by the gearbox control unit. If the car reports it over standard OBD, you read it for nothing with FREE; to read it straight from the gearbox control unit, with its description and clearing, you need PRO.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P074A The gearbox cannot engage gear 2
- P074B The gearbox cannot engage gear 3
- P074C The gearbox cannot engage gear 4
- P074D The gearbox cannot engage gear 5
- P074F The gearbox cannot engage gear 7
- P0750 Shift solenoid A fault
- P0751 Shift solenoid A poor performance or stuck off
- P0752 Shift solenoid A stuck on
- P0700 Transmission control system: fault detected
- P0701 Transmission control system: range/performance
- P0702 Transmission control system: electrical fault
- P0703 Torque converter/brake switch B: circuit fault
What does code P074E mean?
The gearbox cannot engage gear 6.
How do you clear P074E?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P074E comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
