P06F0: The AdBlue control unit internal temperature sensor has an electrical fault
The AdBlue control unit internal temperature sensor has an electrical fault. It may be the part itself, its connector or the wiring.
| Code | P06F0 |
|---|---|
| System | Engine and transmission |
| Group | P06xx, Control unit and auxiliary outputs |
| Type | Generic: it means the same on every make |
How to read and clear P06F0 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P06F0 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P06EA The NOx sensor processor (bank 1
- P06EB The NOx sensor processor (bank 1
- P06ED The engine speed output gives a lower signal than normal
- P06EE The engine speed output gives a higher signal than normal
- P06F1 The AdBlue control unit internal temperature sensor gives readings outside the
- P06F2 The AdBlue control unit internal temperature sensor gives a lower signal than
- P06F3 The AdBlue control unit internal temperature sensor gives a higher signal than
- P06F4 The Stop Start warning light control has an electrical fault
- P0600 Serial communication link fault
- P0601 Internal control module memory checksum error
- P0602 Control module programming error
- P0603 Internal control module keep alive memory (KAM) error
What does code P06F0 mean?
The AdBlue control unit internal temperature sensor has an electrical fault. It may be the part itself, its connector or the wiring.
How do you clear P06F0?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P06F0 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
