P05CF: The cold start B camshaft position timing (bank 2) gives readings outside the
The cold start B camshaft position timing (bank 2) gives readings outside the normal range. It is usually the part, its wiring or a connector with poor contact.
| Code | P05CF |
|---|---|
| System | Engine and transmission |
| Group | P05xx, Speed, idle and auxiliary inputs |
| Type | Generic: it means the same on every make |
How to read and clear P05CF with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P05CF with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P05CB The vehicle hardware incompatibility is not working properly
- P05CC The cold start A camshaft position timing (bank 1) gives readings outside the
- P05CD The cold start A camshaft position timing (bank 2) gives readings outside the
- P05CE The cold start B camshaft position timing (bank 1) gives readings outside the
- P05D0 The driver mode selection switch A has an electrical fault
- P05D1 The driver mode selection switch A gives a lower signal than normal
- P05D2 The driver mode selection switch A gives a higher signal than normal
- P05D3 The driver mode selection switch A gives readings outside the normal range
- P0500 Vehicle speed sensor malfunction
- P0501 Vehicle speed sensor range/performance
- P0502 Vehicle speed sensor circuit low input
- P0503 Vehicle speed sensor intermittent, erratic or high
What does code P05CF mean?
The cold start B camshaft position timing (bank 2) gives readings outside the normal range. It is usually the part, its wiring or a connector with poor contact.
How do you clear P05CF?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P05CF comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
