P058D: The battery monitor module voltage monitoring gives readings outside the normal
The battery monitor module voltage monitoring gives readings outside the normal range. It is usually the part, its wiring or a connector with poor contact.
| Code | P058D |
|---|---|
| System | Engine and transmission |
| Group | P05xx, Speed, idle and auxiliary inputs |
| Type | Generic: it means the same on every make |
How to read and clear P058D with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P058D with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0589 The cruise control multiple function input B has an electrical fault
- P058A The battery monitor module gives readings outside the normal range
- P058B The battery monitor module current monitoring gives readings outside the normal
- P058C The battery monitor module temperature monitoring gives readings outside the
- P058E The battery monitor module temperature is above normal
- P058F The battery monitor module temperature is below normal
- P0590 The cruise control multiple function input B circuit has got stuck
- P0591 The cruise control multiple function input B gives readings outside the normal
- P0500 Vehicle speed sensor malfunction
- P0501 Vehicle speed sensor range/performance
- P0502 Vehicle speed sensor circuit low input
- P0503 Vehicle speed sensor intermittent, erratic or high
What does code P058D mean?
The battery monitor module voltage monitoring gives readings outside the normal range. It is usually the part, its wiring or a connector with poor contact.
How do you clear P058D?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P058D comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
