P0565: There is a fault in the cruise control in the signal
There is a fault in the cruise control in the signal. It may be the part itself, its connector or the wiring.
| Code | P0565 |
|---|---|
| System | Engine and transmission |
| Group | P05xx, Speed, idle and auxiliary inputs |
| Type | Generic: it means the same on every make |
How to read and clear P0565 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P0565 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0561 The system supply voltage is unstable
- P0562 System voltage low
- P0563 System voltage high
- P0564 Fault in the cruise control or speed limiter switch (the steering wheel buttons
- P0566 The off signal from the cruise control main switch is faulty
- P0567 The RESUME signal from the cruise control selector switch is faulty
- P0568 The SET signal from the cruise control main switch is faulty
- P0569 The COAST signal from the cruise control selector switch is faulty
- P0500 Vehicle speed sensor malfunction
- P0501 Vehicle speed sensor range/performance
- P0502 Vehicle speed sensor circuit low input
- P0503 Vehicle speed sensor intermittent, erratic or high
What does code P0565 mean?
There is a fault in the cruise control in the signal. It may be the part itself, its connector or the wiring.
How do you clear P0565?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P0565 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
