P03AF: The cylinder 3 pressure is above normal
The cylinder 3 pressure is above normal. It may be the part itself, its connector or the wiring.
| Code | P03AF |
|---|---|
| System | Engine and transmission |
| Group | P03xx, Ignition and misfires |
| Type | Generic: it means the same on every make |
How to read and clear P03AF with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P03AF with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P03AB The cylinder 3 pressure sensor gives a lower signal than normal
- P03AC The cylinder 3 pressure sensor gives a higher signal than normal
- P03AD The cylinder 3 pressure sensor fails now and then
- P03AE The cylinder 3 pressure is below normal
- P03B0 The cylinder 3 pressure variation gives a lower signal than normal
- P03B1 The cylinder 3 pressure variation gives a higher signal than normal
- P03B2 Combustion in cylinder 3 is not performing as expected
- P03B3 The cylinder 4 pressure sensor has an electrical fault
- P0300 Random or multiple cylinder misfire
- P0301 Misfire detected in cylinder 1
- P0302 Misfire detected in cylinder 2
- P0303 Misfire detected in cylinder 3
What does code P03AF mean?
The cylinder 3 pressure is above normal. It may be the part itself, its connector or the wiring.
How do you clear P03AF?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P03AF comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
