P018B: The fuel pressure sensor B gives readings outside the normal range
The fuel pressure sensor B gives readings outside the normal range. It is usually the sensor itself, its wiring or a real fault in what it measures.
| Code | P018B |
|---|---|
| System | Engine and transmission |
| Group | P01xx, Air and fuel metering |
| Type | Generic: it means the same on every make |
How to read and clear P018B with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P018B with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P0187 The fuel temperature sensor B gives a lower signal than normal
- P0188 The fuel temperature sensor B gives a higher signal than normal
- P0189 The fuel temperature sensor B fails now and then
- P018A The fuel pressure sensor B has an electrical fault
- P018C The fuel pressure sensor B gives a lower signal than normal
- P018D The fuel pressure sensor B gives a higher signal than normal
- P018E The fuel pressure sensor B fails now and then
- P018F The fuel pressure relief system activates too frequently
- P0100 Mass or volume air flow sensor circuit fault
- P0101 Air flow sensor range or performance problem
- P0102 Air flow sensor circuit low input
- P0103 Air flow sensor circuit high input
What does code P018B mean?
The fuel pressure sensor B gives readings outside the normal range. It is usually the sensor itself, its wiring or a real fault in what it measures.
How do you clear P018B?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P018B comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
