C0592: The brake booster motor B phase U V W current is above normal
The brake booster motor B phase U V W current is above normal. It may be the part itself, its connector or the wiring.
| Code | C0592 |
|---|---|
| System | Chassis |
| Group | C05xx, Chassis |
| Type | Generic: it means the same on every make |
How to read and clear C0592 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see C0592 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- C058E The brake booster motor B position sensor gives readings outside the normal
- C058F The regeneration torque gives readings outside the normal range
- C0590 The brake booster motor A phase U V W current is above normal
- C0591 The brake booster motor A phase U V W current is below normal
- C0593 The brake booster motor B phase U V W current is below normal
- C0594 The brake booster motor A gives readings outside the normal range
- C0595 The brake booster internal power driver gives readings outside the normal range
- C0596 The brake booster motor A current sensor gives readings outside the normal range
What does code C0592 mean?
The brake booster motor B phase U V W current is above normal. It may be the part itself, its connector or the wiring.
How do you clear C0592?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, C0592 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
