C058F: The regeneration torque gives readings outside the normal range
The regeneration torque gives readings outside the normal range. It is usually the part, its wiring or a connector with poor contact.
| Code | C058F |
|---|---|
| System | Chassis |
| Group | C05xx, Chassis |
| Type | Generic: it means the same on every make |
How to read and clear C058F with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see C058F with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- C058B The brake booster motor B position sensor has a broken or disconnected wire
- C058C The brake booster motor B position sensor gives a lower signal than normal
- C058D The brake booster motor B position sensor gives a higher signal than normal
- C058E The brake booster motor B position sensor gives readings outside the normal
- C0590 The brake booster motor A phase U V W current is above normal
- C0591 The brake booster motor A phase U V W current is below normal
- C0592 The brake booster motor B phase U V W current is above normal
- C0593 The brake booster motor B phase U V W current is below normal
What does code C058F mean?
The regeneration torque gives readings outside the normal range. It is usually the part, its wiring or a connector with poor contact.
How do you clear C058F?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, C058F comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
