C0569: The brake booster solenoid gives readings outside the normal range
The brake booster solenoid gives readings outside the normal range. It is usually the part, its wiring or a connector with poor contact.
| Code | C0569 |
|---|---|
| System | Chassis |
| Group | C05xx, Chassis |
| Type | Generic: it means the same on every make |
How to read and clear C0569 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see C0569 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- C0565 The ABS control unit system voltage is above normal
- C0566 The brake booster solenoid has a broken or disconnected wire
- C0567 The brake booster solenoid gives a lower signal than normal
- C0568 The brake booster solenoid gives a higher signal than normal
- C056A The brake booster pressure sensor power supply has an electrical fault
- C056B The brake pressure sensor A fails now and then
- C056C The brake pressure sensor B fails now and then
- C056D The brake pedal position sensor power supply voltage is below normal
What does code C0569 mean?
The brake booster solenoid gives readings outside the normal range. It is usually the part, its wiring or a connector with poor contact.
How do you clear C0569?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, C0569 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
