C0565: The ABS control unit system voltage is above normal
The ABS control unit system voltage is above normal. It may be the control unit itself, its power supply or its connector.
| Code | C0565 |
|---|---|
| System | Chassis |
| Group | C05xx, Chassis |
| Type | Generic: it means the same on every make |
How to read and clear C0565 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see C0565 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- C0560 The brake pressure sensor A needs calibrating
- C0562 The brake pedal position sensor power supply voltage has a broken or
- C0563 The ABS control unit gives readings outside the normal range
- C0564 The ABS control unit system voltage is below normal
- C0566 The brake booster solenoid has a broken or disconnected wire
- C0567 The brake booster solenoid gives a lower signal than normal
- C0568 The brake booster solenoid gives a higher signal than normal
- C0569 The brake booster solenoid gives readings outside the normal range
What does code C0565 mean?
The ABS control unit system voltage is above normal. It may be the control unit itself, its power supply or its connector.
How do you clear C0565?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, C0565 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
