Skip to content
Google PlayApp Store

C0086: The stability control warning light is not working properly

The stability control warning light is not working properly. It is usually the bulb or LED, its connector or the wiring.

Code C0086 at a glance
CodeC0086
SystemChassis
GroupC00xx, Chassis
TypeGeneric: it means the same on every make

How to read and clear C0086 with Final OBD

Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see C0086 with its description and whether it’s confirmed, pending or permanent.

If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.

Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.

Similar codes

What does code C0086 mean?

The stability control warning light is not working properly. It is usually the bulb or LED, its connector or the wiring.

How do you clear C0086?

With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, C0086 comes back.