C0085: There is a fault in the indicator showing when traction control is disabled
There is a fault in the indicator showing when traction control is disabled.
| Code | C0085 |
|---|---|
| System | Chassis |
| Group | C00xx, Chassis |
| Type | Generic: it means the same on every make |
How to read and clear C0085 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see C0085 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- C0081 The ABS warning light is not working properly
- C0082 The brake system fault warning light is not working properly
- C0083 The tyre pressure monitoring warning light is not working properly
- C0084 The traction control warning light is not working properly
- C0086 The stability control warning light is not working properly
- C0089 The traction control disable switch has a fault
- C008A There is a fault in the mode control of the TCS traction control system
What does code C0085 mean?
There is a fault in the indicator showing when traction control is disabled.
How do you clear C0085?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, C0085 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
