U3566: The pressure sensor 1 in the anode intake is not working properly
The pressure sensor 1 in the anode intake is not working properly. It may be the sensor itself, its connector or the wiring.
| Code | U3566 |
|---|---|
| System | Communication network |
| Group | U35xx, Communication network |
| Type | Generic: it means the same on every make |
How to read and clear U3566 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see U3566 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- U3547 The high voltage system interlock circuit P gives a lower signal than normal
- U3548 The high voltage system interlock circuit P gives a higher signal than normal
- U355A The first pressure sensor after the intercooler has an electrical fault
- U355C The temperature sensor after the intercooler has an electrical fault
- U3567 The pressure sensor 2 in the anode intake is not working properly
What does code U3566 mean?
The pressure sensor 1 in the anode intake is not working properly. It may be the sensor itself, its connector or the wiring.
How do you clear U3566?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, U3566 comes back.
