U02B2: The comfort display B is not answering on the car network
The comfort display B is not answering on the car network. It is usually that control unit, its power supply or the network wiring.
| Code | U02B2 |
|---|---|
| System | Communication network |
| Group | U02xx, Lost communication with control units |
| Type | Generic: it means the same on every make |
How to read and clear U02B2 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see U02B2 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- U02AE The high voltage battery coolant pump is not answering on the car network
- U02AF The turbo turbine intake valve position sensor is not answering on the car
- U02B0 The boost control B position sensor is not answering on the car network
- U02B1 The comfort display A is not answering on the car network
- U02B4 The front radar A is not answering on the car network
- U02B5 The front radar B is not answering on the car network
- U02B6 The rear radar A is not answering on the car network
- U02B7 The rear radar B is not answering on the car network
What does code U02B2 mean?
The comfort display B is not answering on the car network. It is usually that control unit, its power supply or the network wiring.
How do you clear U02B2?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, U02B2 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
