P2DF8: The water pump E is turning slower than it should
The water pump E is turning slower than it should. It may be the part itself, its connector or the wiring.
| Code | P2DF8 |
|---|---|
| System | Engine and transmission |
| Group | P2Dxx, Engine, emissions and electrification |
| Type | Generic: it means the same on every make |
How to read and clear P2DF8 with Final OBD
Plug an OBD2 scanner in under the steering wheel, switch the ignition on and open Final OBD. Under Faults you’ll see P2DF8 with its description and whether it’s confirmed, pending or permanent.
If the engine stores it over standard OBD, with FREE you read this code with its explanation for nothing and clear it. With PRO you also read the faults of every control unit and clear them in all of them.
Clearing the code only turns the light off: if the cause is still there, it comes back. Clear it once it’s fixed, and not right before an inspection. It’s all in how to read and clear fault codes and in inspections and OBD.
Similar codes
- P2DAF The second temperature probe in the traction motor A (B) gives a higher signal
- P2DB1 The third temperature probe in the traction motor A (C) is not working properly
- P2DB3 The third temperature probe in the traction motor A (C) gives a lower signal
- P2DB4 The third temperature probe in the traction motor A (C) gives a higher signal
What does code P2DF8 mean?
The water pump E is turning slower than it should. It may be the part itself, its connector or the wiring.
How do you clear P2DF8?
With an OBD2 scanner and an app like Final OBD, which clears it for free if it’s stored by the engine control unit. But clearing it only turns the light off: if the cause isn’t fixed, P2DF8 comes back.
Read it on your car
Final OBD reads and clears engine faults through standard OBD for free, each one explained in plain English. With PRO it also reads the faults of every control unit, each make’s own codes included, and clears them in all of them.
